Product center

Committed to the original development and import substitution of PPS polyphenylene sulfide


Extrusion Grade Non-Reinforced Polyphenylene Sulfide

Product characteristics

PPS-E670E09 is an extrusion grade non-reinforced polyphenylene sulfide material, which has the characteristics of ultra-high toughness, high melt strength, chemical corrosion resistance and heat resistance.


This product can be used for extrusion forming rods, pipes, sheet products, etc.

Technical parameters

Physical Propertyunit
Testing StandardTest Result
Densityg/cm3ISO 11831.27
Molding shrinkage-Parallel flow direction%ISO 294-40.4
Molding shrinkage-Vertical flow direction%ISO 294-40.8
Water absorption rate(23℃,24Hrs)%ISO 620.02

Mechanical PropertyunitTesting StandardTest Result
Tensile StrengthMPaISO 52755.0
Flexural StrengthMPaISO 17890.0
Flexural ModulusGPaISO 1782.7
Charpy Impact StrengthkJ/m2ISO 179Can not destroy
Charpy Notched Impact StrengthkJ/m2ISO 17923.5

Thermal propertyunitTesting StandardTest Result
Melting PointISO 11357280.0
Hot Deformation Temperature(1.8MPa)ISO 7588.0
Flame Retardancy

Thermal propertyunitTesting StandardTest Result
Dielectric StrengthkV/mmIEC 60243-
Dielectric Constant
IEC 60250-
Dielectric Loss Factor
IEC 60250-
Volume ResistivityΩ・cmIEC 60093-
Comparative Tracking IndexVIEC 60112-

Injection Molding ConditionsunitReference Value
Drying Tmperature130-150
Drying TimeHrs3-4
Heating temperature of cylinder290-320
Nozzle Temperature300-320
Mold Temperature120-150
Injection PressureMpa80-150
Packing PressureMpa30-70